The Royal Bronze Shaker kitchen cabinets are a stunning addition to any home's culinary space. These meticulously crafted cabinets feature a rich, deep bronze finish that exudes elegance and sophistication. The timeless Shaker-style design, characterized by its clean lines and unadorned simplicity, adds a touch of classic charm to any kitchen. The Royal Bronze finish not only enhances the aesthetic appeal but also offers durability, ensuring these cabinets stand the test of time.

Features

• Roll out tray for a 15" base cabinet. Glides will be ball bearing glides and are not soft-close.

Dimensions Width 10-7/8" | Height 3" | Depth 19-3/8" Style Shaker Face Frame 1-1/2" Solid Birch Door Frame Solid Birch Door Center 3/8" MDF Door Frame Width 3" Center Panel Beveled Edge Yes (slight bevel) Sides 1/2" plywood Top & Bottom (Wall) 1/2" plywood Bottom (Base) 1/2" plywood Back Panel 1/2" plywood Shelves 3/4" plywood Base Cabinet Shelf Depth 1/2 (pantry cabinets will have 3/4 depth shelves) Drawer Box Dovetailed, 5/8" drawer box with 5-piece drawer front Drawer Glides Undermount, full extension, soft close drawer glides Base Corner Supports Wood corner brackets Overlay Full Hinges Concealed, 6-way adjustable, soft close hinges Cabinet Interior UV coated, natural interior Center Stile None Assembly Method Nail/screw/glue: Dovetail box assembly or a dado panel assembly. Tall cabinets will all have a dado assembly w/metal clips (brackets included). Recommend using glue and bradnails for both assembly methods. Finish 7-step acid catalyzed (AC) stain finish process, with an AC top coat Toe Kick 1/2" plywood Installation Rail 1/2" plywood (1-1/2" narrower than cabinet width) Wall Cabinet Bottoms Finished (Exterior) Yes (side panel bottom edges will be unfinished) CARB Compliant Yes Door Hinges Hinged right by default, hinge pilot holes are also pre-drilled on the left side of the face frame. For base cabinets, the hinges from the right side of the face frame can be removed, then screwed into the pilot holes on the left, for a left hinged door. Wall cabinets can have the door flipped around for a left hinge install. Toe Kicks Included w/Base Cabinets Natural toe kicks are included but 8' toe kicks (TK96) in the same finish as the cabinets need to be purchased separately to finish the toe kick area and cover any gaps from adjacent cabinets. Sides Panels Finished: Yes No, finished side(s) must be specified from options menu for each sku. Installation/Designer Note The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet and a cabinet door opening of at least 90 degrees is desired, scribe molding should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90 degrees. For a full opening, a space of at least 1/4-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specificationsforthis collection can be found in theconstruction detailslisted above.